$4.50
-
We’ve wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
There are no questions yet, be the first to ask something for this product.
This is the latest version of the MicroSquirt, only from AMP EFI and our dealers! The AMP'd MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switche...
Select options
Have an application with a lot of small solenoids that need 12V power and rapid switching? Don't want the expense of a bank of four separate solid state relays, each rated for five times the current each solenoid needs? This module lets you run up to four...
Add to cart
The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 375...
Add to cart
MicroSquirt Engine Management System with Connector & Pins Version 3.0 The versatile MicroSquirt: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module Microsquirt is our entry-level fully assembled ECU with v...
Add to cart
The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cart
Making your own harness? This plug and pin kit features the MS3-Pro AMPSEAL connectors plus 75 pins (so you'll have a couple extras) for making your own MS3-Pro EVO harness. (or Gen1 if you wish) Download AMPSEAL Assembly Instructions
Add to cart