$23.99
-
If you have a previously installed MS3Pro harness (1st Gen) and want to change to an MS3Pro ULTIMATE or EVO ECU, the upgrade path is simple. However, complete functionality will require a few basic changes to your 1st Gen harness. Our wiring upgrade kit contains the 8 pre-pinned, color-matched wire leads needed for a complete conversion.
You must be logged in to post a comment.
There are no questions yet, be the first to ask something for this product.
Optional, connect MS3Pro ULTIMATE directly to your laptop with this 4 pin M12 serial cable.
Read more
We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.
Add to cart
Have an application with a lot of small solenoids that need 12V power and rapid switching? Don't want the expense of a bank of four separate solid state relays, each rated for five times the current each solenoid needs? This module lets you run up to four...
Add to cart
Wire - Twin Core Shielded 22 Gauge - 10' Shielded twin core 22 gauge wire helps cut out interference -- Perfect for Tach/Ignition Signal! This temperature resistant wire has two separate 22 gauge wires in the shield, making it perfect for variable relu...
Add to cart
Many older tachometers trigger off the negative terminal of the ignition coil. Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...
Add to cart
AMPEFI 4L60E Plug and Play Transmission Control Seamlessly control your 4L60E transmission with AMPEFI Transmission Control! The supplied 4L60E subharness provides a simple, plug and play integration with MS3Pro and directly mates with our LSx drop ...
Add to cart
Reviews
There are no reviews yet.